Michem® Tite 335AF

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.


A coating which bonds corrugated to Surlyn or polyethylene skin pack films, firmly trapping the product in between. Provides excellent adhesion to most wax free, water based or litho inks. This product is hot melt gluable.


Skin packing / heat seal coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Perishablesskin packaging

See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceSemi-viscous liquid
Percent Non-Volatile32.3 - 35.3
Brookfield Viscosity (cps, mPa·s) 150 - 850
Spindle Number3

Site of Manufacture (and Product Code)


Application Data

Michem® Tite 335AF can be applied to sheeted corrugated using a roll coater. EZ Cup Viscosity = 15 - 35 seconds, #3 Cup. It can also be applied at the dry end of the corrugator.


Handle in accordance with good industrial hygiene and safety practice.