Michem® Wood Release 1117A

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.

Usage

Release agent for pMDI based oriented strand board, linear strand board and particleboard engineered wood. It provides a low COF coating creating release of the wood fiber from the press plate, resulting in a lighter colored board with reduced buildup. Operating with this product virtually eliminates process slip issues resulting in improved productivity. Exhibits minimal nasal irritation compared to other soap based products.

Description

Proprietary release blend

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Laminated Strand Boardrelease
Oriented Strand Boardrelease

See more products recommended for Laminated Strand Board.
See more products recommended for Oriented Strand Board.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceClear liquid
Percent Non-Volatile16.5 - 17.5
Brookfield Viscosity (cps, mPa·s) 0 - 200
Spindle Number2
RPM60

Site of Manufacture (and Product Code)

CIN (MWR1117A)
SNG (MWR1117A.S)

Application Data

Michem® Wood Release 1117A is easily dilutable with water and can be applied by spraying over the fiber mat, board caul or press plate. Soft or deionized water is recommended for dilution.