Michem® Wood Release 1136
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Release agent for pMDI based oriented strand board, linear strand board and particleboard engineered wood. It provides a low coefficient of friction coating creating release of the wood fiber from the press plate resulting in a lighter colored board with reduced build up. Virtually eliminates process slip issues resulting in improved productivity.
Proprietary release blend.
This product is used in many applications including the following:
|Laminated Strand Board||release|
|Oriented Strand Board||release|
See more products recommended for Laminated Strand Board.
See more products recommended for Oriented Strand Board.
These physical properties are typical but should not be considered specifications.
|Appearance||Clear to straw colored liquid|
|Percent Non-Volatile||35.0 - 37.0|
|Brookfield Viscosity (cps, mPa·s)||0 - 400|
Site of Manufacture (and Product Code)
Michem® Wood Release 1136 is easily dilutable with water and can be applied by spraying over the fiber mat, board caul or press plate. Soft or deionized water is recommended for dilution.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Product containers should be kept closed prior to use and when not in use.. Use personal protective equipment as required.