Michem® Wood Release 2240
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Designed for use as an internal release agent for the manufacture of pMDI pressed engineered wood products. It is applied upstream prior to the addition of resin providing excellent release at a low application rate and easy removal of build-up if occurring over time. It provides the added benefit of aiding cleanliness in the blow line and drier tube resulting in reduced downtime. Michelman internal application equipment is available for trialing.
Proprietary release blend
This product is used in many applications including the following:
|Medium Density Fiberboard||release|
See more products recommended for Medium Density Fiberboard.
These physical properties are typical but should not be considered specifications.
|Appearance||Amber, translucent emulsion|
|Percent Non-Volatile||39.5 - 40.5|
|Brookfield Viscosity (cps, mPa·s)||<150|
Site of Manufacture (and Product Code)
Avoid contact with eyes. Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Product containers should be kept closed prior to use and when not in use.. Use personal protective equipment as required.