Michem® Wood Release 6015

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.


A proprietary release blend that is applied directly to the steel belt prior to pressing. It offers a low COF barrier and provides release of panels at low application rates.


Proprietary release blend

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Medium Density Fiberboardrelease

See more products recommended for Medium Density Fiberboard.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceClear to straw colored liquid
Percent Non-Volatile15.0 - 16.0
Brookfield Viscosity (cps, mPa·s) <200
Spindle Number2

Site of Manufacture (and Product Code)

AUB (MWR6015.E)

Application Data

Michem® Wood Release 6015 is easily dilutable with water and can be applied by spraying or roll coating over the fiber mat, board caul or press plate. Soft or deionized water is recommended for dilution.