PCL 500

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.


Designed to reduce hot plate frictional drag and improve board quality, this paper lubricant is applied to linerboard at the wet end of the doublebacker. In addition, PCL500 eliminates the smoky vapor cloud at the doublebacker caused by oil based lubricants. Properly diluted, it is gluable and printable.


Nonionic polyethylene emulsion

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Perishableslubricity for paper converting

See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceAmber, translucent liquid
Percent Non-Volatile34.5 - 35.5
Brookfield Viscosity (cps, mPa┬Ěs) 30 - 100
Spindle Number2

Site of Manufacture (and Product Code)

CIN (PCL500)
AUB (PCL500.E)

Application Data

PCL500 should be applied at the wet end of the double backer.


Avoid contact with eyes. Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Wear personal protective equipment.