ProHere® L 90013
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Used as an additive to provide lubricity, block and abrasion resistance and scratch resistance to metal coatings.
Nonionic Fischer-Tropsch wax emulsion
This product is used in many applications including the following:
|Can & Coil||block resistance, lubricity, mar resistance, mold release|
|General Metal||abrasion resistance, block resistance, enhanced lubricity, scratch resistance, torque/tension control|
See more products recommended for Can & Coil.
See more products recommended for General Metal.
These physical properties are typical but should not be considered specifications.
|Appearance||white opaque liquid|
|Percent Non-Volatile||38.0 - 42.0|
|Brookfield Viscosity (cps, mPa·s)||<120|
Site of Manufacture (and Product Code)
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.