Topaz 17 Solution
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
A solvent based primer designed to be applied via screen printing on plastic sheets to make them print compatible with Indigo technology.
Primer for use with HP Indigo press s2000
This product is used in many applications including the following:
|HP Indigo Solutions||Applicator - screen, OEM - Indigo ws2000, Substrate - film|
See more products recommended for HP Indigo Solutions.
These physical properties are typical but should not be considered specifications.
|Percent Non-Volatile||16.5 - 17.5|
|Brookfield Viscosity (cps, mPa·s)||70 - 90|
Site of Manufacture (and Product Code)
Topaz 17 Solution is applied via silk-screen printing technology on untreated plastic film and sheets. The recommended dry coat weight is approximately 1.9 g/m2. Make sure all equipment is adequately cleaned and that no residue from other materials is present. Use our Topaz Indicator Solution to check quality of the coating. Cleaning only with iso or n-propanol is recommended.
Ensure adequate ventilation. Use personal protective equipment as required.