Topaz Indicator

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.


An indicator designed to measure the uniformity of the coated substrate.


Indicator solution for Topaz primed sheet substrates

Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceBluish liquid
Percent Non-Volatile0.00 - 0.99
Brookfield Viscosity (cps, mPa┬Ěs) <50
Spindle Number3

Site of Manufacture (and Product Code)


Application Data

1. Soak a cotton pad with Topaz Indicator solution. 2. Wipe gently across the web on both the coated and non-coated areas of the sheet. The streak should be bluish and consistent in the applied area, showing a contrast with the non-coated area. 3. Color uniformity indicates the application uniformity level.


Ensure adequate ventilation. Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharges. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Use only in an area containing flame proof equipment. Wear personal protective equipment.