Wax Dispersion 40

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.


Most effective as a water repellent aid, this dispersion also has some slip and release properties in solvent applications. It is most effective when used in formulations for deck, architectural and industrial coatings.


Solvent dispersion of paraffin wax

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Automotive Carebuffability
Exterior Wood Protectionwater beading, water repellence, water resistance

See more products recommended for Automotive Care.
See more products recommended for Exterior Wood Protection.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceOpaque paste
Percent Non-Volatile39.5 - 40.5
Brookfield Viscosity (cps, mPa┬Ěs) paste

Site of Manufacture (and Product Code)

CIN (WD40)


Ensure adequate ventilation. Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharges. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Use only in an area containing flame proof equipment. Wear personal protective equipment.