Michem® Prime 5931

Brand Family Overview

NurtureYield® is a family of additives and binders for coatings formulations designed to protect and improve the performance and processing of agricultural materials. Products which can be improved by the use of NurtureYield include seeds, plants, and fruits.

See more NurtureYield products.


Provides improved adhesion to polyolefin substrates and also exhibits excellent adhesion to paper, metallic and polymeric substrates as well as glass and polyester scrim. It can serve as a tie coat or primer and increases printability on metallic and polymeric substrates. It can be used as a heat sealable coating on most polymeric films, paper and foil. Patents Pending.


Modified ethylene acrylic acid dispersion

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Cable & Cordageadhesion promotion, heat seal
Textiles & Leatheradhesion promotion, heat seal
Fiber SizingPE compatible
Inksadhesion promotion, chemical resistance
Overprint Varnishesadhesion promotion, chemical resistance
Nonwovensheat seal for binders

See more products recommended for Cable & Cordage.
See more products recommended for Textiles & Leather.
See more products recommended for Fiber Sizing.
See more products recommended for Inks.
See more products recommended for Overprint Varnishes.
See more products recommended for Nonwovens.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite translucent liquid
pH8.0 - 10.0
Emulsifier ChargeAmmoniated dispersion
Percent Non-Volatile27.5 - 29.0
Recommended pH Range>7
Brookfield Viscosity (cps, mPa·s) <100
Spindle Number3

Site of Manufacture (and Product Code)

CIN (MP5931)
AUB (MP5931.E)
SNG (MP5931.S)

Application Data

Michem®Prime 5931 can be applied by flexographic or rotogravure coating methods. A typical application rate of 1-2 gsm dry coating weight is recommended for most heat seal applications. As a tie coat or print primer application rates of 0.2 to 0.5gsm are usually sufficient. EZ Cup Viscosity = 8 - 13seconds, #3 Cup.


Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.