Designed to reduce hot plate frictional drag and improve board quality, this paper lubricant is applied to linerboard at the wet end of the doublebacker. In addition, PCL500 eliminates the smoky vapor cloud at the doublebacker caused by oil based lubricants. Properly diluted, it is gluable and printable.
Nonionic polyethylene emulsion
This product is used in many applications including the following:
|Corrugated||lubricity for paper converting|
See more products recommended for Corrugated.
These physical properties are typical but should not be considered specifications.
|Appearance||Amber, translucent liquid|
|EZ Cup Viscosity (s)||10 - 20|
|pH||9.5 - 10.7|
|Brookfield Viscosity (cps, mPa·s)||30 - 100|
Site of Manufacture (and Product Code)
PCL500 should be applied at the wet end of the double backer.