DigiPrime® 050

Brand Family Overview

ProHere™ grades are waterborne polymer dispersions and emulsions specifically developed for use in metal coatings. The range encompasses both polymer resins that can serve as organic binders in a coating formulation as well as lubricants and anti-scratch additives for metal processing and in-use lubricants.

See more ProHere Additives products.

Usage

Imparts a print-receptive surface to film and metalized film substrates to improve the transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available on the Indigo 20000 Digital Press. This product is suitable for food contact.

Description

Primer for digital printing

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
HP Indigo SolutionsApplicator - Indigo ILP station, OEM - Indigo ws20000, Substrate - film

See more products recommended for HP Indigo Solutions.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceClear liquid
pH9.5 - 11.5
Percent Non-Volatile8.0 - 10.0
Brookfield Viscosity (cps, mPa·s) 8 - 25
Spindle Number1
RPM60

Site of Manufacture (and Product Code)

CIN (DP050)
AUB (DP050.E)
SNG (DP050.S)

Application Data

Indigo 20000 Digital Press Clean up must be accomplished with soft water while the applicator roll is still damp. In case the primer dries, residue may be cleaned by scrubbing with soap and water. For hard residues, a mix of caustic solution might be used. Do not dilute.