Michem® Coat 40 Plus

Brand Family Overview

ProHere™ grades are waterborne polymer dispersions and emulsions specifically developed for use in metal coatings. The range encompasses both polymer resins that can serve as organic binders in a coating formulation as well as lubricants and anti-scratch additives for metal processing and in-use lubricants.

See more ProHere Additives products.


Designed to provide good water resistance to corrugated board while being cold set gluable with most adhesives.


Water resistant, gluable coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Food Servicewater resistance
Perishableswater resistance

See more products recommended for Food Service.
See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite, semi-viscous liquid
pH8.0 - 10.0
Percent Non-Volatile29.5 - 30.5
Brookfield Viscosity (cps, mPa·s) 250 - 450
Spindle Number3

Application Data

Michem ® Coat 40 Plus can be applied either in-line or off-line on the corrugator, wet or dry end, rod or blade.