Michem® Emulsion 1270

Brand Family Overview

ProHere™ grades are waterborne polymer dispersions and emulsions specifically developed for use in metal coatings. The range encompasses both polymer resins that can serve as organic binders in a coating formulation as well as lubricants and anti-scratch additives for metal processing and in-use lubricants.

See more ProHere Additives products.


Provides slip and block resistance in a wide variety of coatings and formulas. It has very broad global food contact compliance, combined with a wide pH compatibility. It is a more cost effective solution than Michem® Emulsion 13025P.


Nonionic carnauba emulsion

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Functional Coatingsblock resistance, slip and lubricity

See more products recommended for Functional Coatings.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceTan, low viscosity liquid
pH8.0 - 11.0
Emulsifier ChargeNonionic
Percent Non-Volatile24.5 - 25.5
Recommended pH Range2.0 - 12.0
Brookfield Viscosity (cps, mPa·s) 40 max
Spindle Number1

Site of Manufacture (and Product Code)

AUB (me1270.E)

Application Data

Michem® Emulsion 1270 should be added at a few percent solids (typically 2 to 4%) in your coating, with adequate mixing.