Michem® Lube 160RPH

Brand Family Overview

ProHere™ grades are waterborne polymer dispersions and emulsions specifically developed for use in metal coatings. The range encompasses both polymer resins that can serve as organic binders in a coating formulation as well as lubricants and anti-scratch additives for metal processing and in-use lubricants.

See more ProHere Additives products.

Usage

APEO-free and formaldehyde-free slip additive made from renewable materials allowing to control the coefficient of friction. This additive enters the formulation of acrylics, PVdC and Michelman low temperature heat seal coatings without affecting bond strength, printability and barrier properties of the coatings. Michem® Lube 160 RPH fully complies with FDA and EU food contact regulations.

Description

Slip and anti-block properties

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Functional Coatingsblock resistance, slip and lubricity

See more products recommended for Functional Coatings.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceCream colored, opaque liquid
pH4.0 - 7.0
Percent Non-Volatile24.5 - 25.5
Brookfield Viscosity (cps, mPa·s) <15
Spindle Number1
RPM60

Site of Manufacture (and Product Code)

CIN (ML160RPH)
AUB (ML160RPH.E)
SNG (ML160RPH.S)

Application Data

To be used as additive.