Michem® Coat 40 Plus N

Brand Family Overview

ProHere™ grades are waterborne polymer dispersions and emulsions specifically developed for use in metal coatings. The range encompasses both polymer resins that can serve as organic binders in a coating formulation as well as lubricants and anti-scratch additives for metal processing and in-use lubricants.

See more ProHere Binders products.


A water based coating designed to provide good water resistance to corrugated board. It is cold set gluable with most adhesives.


Water resistant, gluable coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Perishableswater resistance

See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite, semi-viscous liquid
pH5.0 - 10.0
Percent Non-Volatile29.0 - 31.0
Brookfield Viscosity (cps, mPa·s) 200 - 800
Spindle Number3

Site of Manufacture (and Product Code)


Application Data

Michem® Coat 40 Plus N can be applied either in-line or off-line on the corrugator at the wet or dry end, via rod or blade.


Handle in accordance with good industrial hygiene and safety practice.