Michem® Coat 40W AFP
Brand Family Overview
ProHere™ grades are waterborne polymer dispersions and emulsions specifically developed for use in metal coatings. The range encompasses both polymer resins that can serve as organic binders in a coating formulation as well as lubricants and anti-scratch additives for metal processing and in-use lubricants.See more ProHere Binders products.
Water resistant coating with excellent cold set gluability.
Water resistant, gluable coating
This product is used in many applications including the following:
See more products recommended for Corrugated.
These physical properties are typical but should not be considered specifications.
|pH||7.0 - 9.0|
|Percent Non-Volatile||29.0 - 31.0|
|Brookfield Viscosity (cps, mPa·s)||450 - 950|
Site of Manufacture (and Product Code)
Michem® Coat 40W AFP can be applied at the wet or dry end of the corrugator using either a blade or rod coater. It can also be applied offline.
Handle in accordance with good industrial hygiene and safety practice.