Michem® Flex HS 268
Brand Family Overview
ProHere™ grades are waterborne polymer dispersions and emulsions specifically developed for use in metal coatings. The range encompasses both polymer resins that can serve as organic binders in a coating formulation as well as lubricants and anti-scratch additives for metal processing and in-use lubricants.See more ProHere Binders products.
Used for heat sealing or dry bond lamination applications, offering low temperature seal initiation and stronger bonds to paper, metal (foil or metalized surface), various primed films such as matt, pearlized cavitated BOPP or BOPET films. It should be used with the addition of a wax emulsion to control the coefficient of friction (typically 2 to 4% by weight) e.g. Michem® Lube 160 RPH.
Water based dispersion of high molecular weight polyolefin
This product is used in many applications including the following:
|Heat Seal Coatings||metal, Substrate - film, Substrate - paper|
See more products recommended for Heat Seal Coatings.
See more products recommended for Functional Coatings.
These physical properties are typical but should not be considered specifications.
|pH||9.4 - 10.5|
|Percent Non-Volatile||36.0 - 39.0|
|Brookfield Viscosity (cps, mPa·s)||100 - 350|
Site of Manufacture (and Product Code)
Michem® Flex HS 268 can be applied via rod, gravure, and spray. The EZ cup viscosity value for a #3 cup is 33 - 35 seconds.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.