Michem® Prime 4983R
Brand Family Overview
ProHere™ grades are waterborne polymer dispersions and emulsions specifically developed for use in metal coatings. The range encompasses both polymer resins that can serve as organic binders in a coating formulation as well as lubricants and anti-scratch additives for metal processing and in-use lubricants.See more ProHere Binders products.
Provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or primer for extrusion coatings, a foil laminate, a specialty paper coating, a paper sizing agent, a heat sealable coating, nonwoven binder and can also be used as a thermally active binder in thermal transfer release coatings.
Ethylene acrylic acid dispersion
This product is used in many applications including the following:
|Cable & Cordage||fiber treatment|
|Textiles & Leather||adhesion promotion, chemical resistance, fiber sizing, heat seal|
|Die Lubes & Mold Releases||adhesion promotion, chemical resistance, heat seal, lubricity, thermal transfer release|
|Functional Coatings||adhesion promotion, chemical resistance, heat seal, thermal transfer release|
|Fiber Sizing||PE compatible|
|Inks||adhesion promotion, chemical resistance, heat seal, thermal transfer release|
|Overprint Varnishes||adhesion promotion, chemical resistance, heat seal, thermal transfer release|
|Nonwovens||heat seal for binders|
See more products recommended for Cable & Cordage.
See more products recommended for Textiles & Leather.
See more products recommended for Die Lubes & Mold Releases.
See more products recommended for Functional Coatings.
See more products recommended for Fiber Sizing.
See more products recommended for Inks.
See more products recommended for Overprint Varnishes.
See more products recommended for Nonwovens.
See more products recommended for Thermal Transfer.
These physical properties are typical but should not be considered specifications.
|pH||8.4 - 9.4|
|Emulsifier Charge||Ammoniated dispersion|
|Percent Non-Volatile||24.2 - 25.4|
|Recommended pH Range||>7|
|Brookfield Viscosity (cps, mPa·s)||50 - 400|
Site of Manufacture (and Product Code)
Handle in accordance with good industrial hygiene and safety practice.