Michem® Tite 335AF
Brand Family Overview
ProHere™ grades are waterborne polymer dispersions and emulsions specifically developed for use in metal coatings. The range encompasses both polymer resins that can serve as organic binders in a coating formulation as well as lubricants and anti-scratch additives for metal processing and in-use lubricants.See more ProHere Binders products.
A coating which bonds corrugated to Surlyn or polyethylene skin pack films, firmly trapping the product in between. Provides excellent adhesion to most wax free, water based or litho inks. This product is hot melt gluable.
Skin packing / heat seal coating
This product is used in many applications including the following:
See more products recommended for Corrugated.
These physical properties are typical but should not be considered specifications.
|pH||7.8 - 8.8|
|Percent Non-Volatile||32.3 - 35.3|
|Brookfield Viscosity (cps, mPa·s)||150 - 850|
Site of Manufacture (and Product Code)
Michem® Tite 335AF can be applied to sheeted corrugated using a roll coater. EZ Cup Viscosity = 15 - 35 seconds, #3 Cup. It can also be applied at the dry end of the corrugator.
Handle in accordance with good industrial hygiene and safety practice.