Michem® Lube 160RPH
Brand Family Overview
ProHere® grades are waterborne polymer dispersions and emulsions specifically developed for use in metal coatings. The range encompasses both polymer resins that can serve as organic binders in a coating formulation as well as lubricants and anti-scratch additives for metal processing and in-use lubricants.See more ProHere L products.
APEO-free and formaldehyde-free slip additive made from renewable materials allowing to control the coefficient of friction. This additive enters the formulation of acrylics, PVdC and Michelman low temperature heat seal coatings without affecting bond strength, printability and barrier properties of the coatings. Michem® Lube 160 RPH fully complies with FDA and EU food contact regulations.
Slip and anti-block properties
This product is used in many applications including the following:
|Functional Coatings||block resistance, slip and lubricity|
See more products recommended for Functional Coatings.
These physical properties are typical but should not be considered specifications.
|Appearance||Cream colored, opaque liquid|
|pH||4.0 - 7.5|
|Percent Non-Volatile||24.5 - 25.5|
|Brookfield Viscosity (cps, mPa·s)||<15|
Site of Manufacture (and Product Code)
To be used as additive.