DigiGuard® Gloss 110
Brand Family Overview
ProHere® grades are waterborne polymer dispersions and emulsions specifically developed for use in metal coatings. The range encompasses both polymer resins that can serve as organic binders in a coating formulation as well as lubricants and anti-scratch additives for metal processing and in-use lubricants.See more ProHere products.
A high gloss, temperature resistant, water based overprint varnish which meets FDA food contact requirements.
Overprint varnish for flexible packaging
This product is used in many applications including the following:
|Overprint Varnish||Applicator - flexo / gravure/ roll, food packaging, heat resistance, high gloss|
See more products recommended for Overprint Varnish.
These physical properties are typical but should not be considered specifications.
|Appearance||White, translucent liquid|
|pH||8.0 - 10|
|Percent Non-Volatile||38.0 - 40.0|
|Brookfield Viscosity (cps, mPa·s)||<200|
Site of Manufacture (and Product Code)
DigiGuard® Gloss 110 can be applied by flexo, gravure or roll coater. A drying temperature of 60C or above will ensuer optimum heat resistance of the coating is achieved.