Priming Solution Indicator
Brand Family Overview
ProHere® grades are waterborne polymer dispersions and emulsions specifically developed for use in metal coatings. The range encompasses both polymer resins that can serve as organic binders in a coating formulation as well as lubricants and anti-scratch additives for metal processing and in-use lubricants.See more ProHere products.
Priming solution indicator used to prove the presence of primer solution on the sheet. Yellow to orange liquid turning blue in presence of ILP and Sapphire coated substrates.
Indicator solution for primed paper substrates.
These physical properties are typical but should not be considered specifications.
|Appearance||Yellow to orange liquid|
|Percent Non-Volatile||0.0 - 0.99|
|Brookfield Viscosity (cps, mPa·s)||<50|
Site of Manufacture (and Product Code)
1) Using a graduated eyedropper (pipette), dispense 10 drops of the indicator on the treated sheet. 2) Stream the indicator across the length and width of the sheet, including edges. Wait 30 seconds, then blot the excess with an absorbent towel. 3) Check color change to light blue, indicating the presence of the primer solution.
Ensure adequate ventilation. Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharges. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Use only in an area containing flame proof equipment.