Brand Family Overview
Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable.See more Release Coat products.
A print primer which provides excellent adhesion of HP Indigo electro inks to treated films and paper. It adheres well to many synthetics, including soft vinyl. This product is designed for screen printing, but may also be applied via flexo and other methods.
Off-line primer for HP Indigo printability
This product is used in many applications including the following:
|HP Indigo Solutions||Applicator - flexo / gravure/ roll, Applicator - screen, OEM - Indigo various presses, Substrate - vinyl|
See more products recommended for HP Indigo Solutions.
These physical properties are typical but should not be considered specifications.
|Appearance||White to light yellow, opaque liquid|
|pH||8.0 - 9.0|
|Brookfield Viscosity (cps, mPa·s)||800 - 1500|
Site of Manufacture (and Product Code)
DigiPrime® 5100 has been developed specifically for screen printing. It may also be applied via flexo, gravure, rod or roll coating systems. For screen printing, the following is recommended: 1. Mesh size: 180 lines per cm/460 lines per inch. 2. Thread diameter nominal: 27 micron 3. Squeegee: 80 Durometer A 4. Tension: 20-30N