Ecrovin® LV 382
Brand Family Overview
Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable.See more Release Coat products.
Optimized for low VOC interior wall paints, this emulsion provides excellent wet scrub resistance due to outstanding pigment binding power of the binder in heavily-filled systems. It also offers very good abrasion resistance and hiding power and is APE free.
Water-based vinyl acetate copolymer emulsion
This product is used in many applications including the following:
|Building Paints||abrasion resistance, hiding power, wet scrub resistance|
See more products recommended for Building Paints.
These physical properties are typical but should not be considered specifications.
|pH||3.0 - 5.0|
|Brookfield Viscosity (cps, mPa·s)||100 - 800|
Site of Manufacture (and Product Code)
This emulsion is compatible with most common additives, pigments and pigment preparations and can be combined with other emulsions. Due to the variety of products in the market, compatibility and storage stability have to be tested from case to case. Polyurethane thickeners are highly recommended but most commercial thickeners can be used. Due to the low minimum film forming temperature of this emulsion it is not mandatory to add coalescing agents. For application properties of the final product it might be helpful to add co-solvents like butyl glycol, butyl diglycol, Texanol or glycolether. For Storage and Safety information see Material Safety Data Sheet.