Michem® Coat 55
Brand Family Overview
Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable.See more Release Coat products.
An oil and grease resistant coating which also imparts good water resistance. It is printable and gluable with water based and hot melt adhesives.
Fluorocarbon free, water and grease resistant coating
This product is used in many applications including the following:
|Food Service||grease & oil resistance|
See more products recommended for Food Service.
These physical properties are typical but should not be considered specifications.
|pH||8.5 - 9.5|
|Brookfield Viscosity (cps, mPa·s)||200 - 650|
Site of Manufacture (and Product Code)
Michem® Coat 55 is an excellent choice for application at the wet end of the corrugator or offline using a rod coater with minimum #2 rod. Do not dilute.
Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.