Michem® Tite 242AF
Brand Family Overview
Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable.See more Release Coat products.
A coating designed to provide a tenacious bond between corrugated and either Surlyn or polyethylene clear skin pack films, firmly trapping the product in between. It can only be glued with hot melt adhesives, except where the coating has been flexo applied and ommitted from areas to be glued.
Skin packaging primer
This product is used in many applications including the following:
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||9.2 - 10.2|
|Brookfield Viscosity (cps, mPa·s)||300 max|
Site of Manufacture (and Product Code)
MT242AF is usually applied at the dry end of the corrugator. EZ Cup Viscosity = 15 - 30seconds, #3 Cup.
Handle in accordance with good industrial hygiene and safety practice.