Michem® Tite 335AF
Brand Family Overview
Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable.See more Release Coat products.
A coating which bonds corrugated to Surlyn or polyethylene skin pack films, firmly trapping the product in between. Provides excellent adhesion to most wax free, water based or litho inks. This product is hot melt gluable.
Skin packing / heat seal coating
This product is used in many applications including the following:
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||7.8 - 8.8|
|Brookfield Viscosity (cps, mPa·s)||150 - 850|
Site of Manufacture (and Product Code)
Michem® Tite 335AF can be applied to sheeted corrugated using a roll coater. EZ Cup Viscosity = 15 - 35 seconds, #3 Cup. It can also be applied at the dry end of the corrugator.
Handle in accordance with good industrial hygiene and safety practice.