Brand Family Overview
Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable.See more Release Coat products.
Designed to reduce hot plate frictional drag and improve board quality, this paper lubricant is applied to linerboard at the wet end of the doublebacker. In addition, PCL500 eliminates the smoky vapor cloud at the doublebacker caused by oil based lubricants. Properly diluted, it is gluable and printable.
Nonionic polyethylene emulsion
This product is used in many applications including the following:
|Perishables||lubricity for paper converting|
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|Appearance||Amber, translucent liquid|
|pH||9.5 - 10.7|
|Brookfield Viscosity (cps, mPa·s)||30 - 100|
Site of Manufacture (and Product Code)
PCL500 should be applied at the wet end of the double backer.
Avoid contact with eyes. Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Wear personal protective equipment.