Brand Family Overview
Single-component Release Coat® keeps hot rubber and asphalt from sticking to corrugated containers without the use of a costly plastic bag. It is easy to use, requires no mixing, is corrugator-applied and repulpable.See more Release Coat products.
An indicator designed to measure the uniformity of the coated substrate.
Indicator solution for Topaz primed sheet substrates
These physical properties are typical but should not be considered specifications.
|Brookfield Viscosity (cps, mPa·s)||<50|
Site of Manufacture (and Product Code)
1. Soak a cotton pad with Topaz Indicator solution. 2. Wipe gently across the web on both the coated and non-coated areas of the sheet. The streak should be bluish and consistent in the applied area, showing a contrast with the non-coated area. 3. Color uniformity indicates the application uniformity level.
Ensure adequate ventilation. Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharges. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Use only in an area containing flame proof equipment. Use personal protective equipment as required.