Michem® Lube 160RPH
Brand Family Overview
Softak® is an easy-to-apply water-based, functional coating that increases the angle of skid of paper to 30-45 degrees. By preventing slippage, it enhances the transport efficiency of palletized loads, boxes and furniture.See more SofTak products.
APEO-free and formaldehyde-free slip additive made from renewable materials allowing to control the coefficient of friction. This additive enters the formulation of acrylics, PVdC and Michelman low temperature heat seal coatings without affecting bond strength, printability and barrier properties of the coatings. Michem® Lube 160 RPH fully complies with FDA and EU food contact regulations.
Slip and anti-block properties
This product is used in many applications including the following:
|Functional Coatings||block resistance, slip and lubricity|
See more products recommended for Functional Coatings.
These physical properties are typical but should not be considered specifications.
|Appearance||Cream colored, opaque liquid|
|pH||4.0 - 7.5|
|Brookfield Viscosity (cps, mPa·s)||<15|
Site of Manufacture (and Product Code)
To be used as additive.