Ecrovin® LV 470

Brand Family Overview

StaticBan® conductive coatings provide optimal levels of protection against damaging electrical microcurrents. These waterbased coatings form a protective shield around sensitive electronic products, and eliminate the need for separate protective coatings to prevent rub-off.

See more StaticBan products.


Provides good blocking resistance and high gloss in latex paints. This product is APE free.


Terpolymer emulsion based on vinyl acetate/vinyl versatate/maleic acid ester

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Building Paintsblock resistance, gloss enhancement

See more products recommended for Building Paints.
Physical Properties

These physical properties are typical but should not be considered specifications.

Appearancewhite liquid
pH3.0 - 6.0

Site of Manufacture (and Product Code)


Application Data

This emulsion is compatible with most additives, pigments and pigment preparations and can be combined with other emulsions. Due to the variety of product in the market, compatibility and storage stability have to be tested from case to case. Polyurethane thickeners are highly recommended but most commercial thickeners can be used. Due to the low minimum film forming temperature of this emulsion it is not mandatory to add coalescing agents. For application properties of the final product it might be helpful to add co-solvents like butyl glycol, butyl diglycol, Texanol or glycol ether. For Storage and Safety information see Material Safety Data Sheet.