Michem® Coat 81
Brand Family Overview
StaticBan® conductive coatings provide optimal levels of protection against damaging electrical microcurrents. These waterbased coatings form a protective shield around sensitive electronic products, and eliminate the need for separate protective coatings to prevent rub-off.See more StaticBan products.
A repulpable, printable, and cold set gluable coating optimized for water resistance and intermediate MVTR protection. Common uses include packaging for produce and meats, or anywhere packaged goods require protection from water or moisture vapor. It can be used alone as a single bump, or can be an ideal base coat for other barrier-enhancing Michelman coatings.
Water resistant coating with intermediate moisture barrier.
This product is used in many applications including the following:
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||8.5 - 10.0|
Site of Manufacture (and Product Code)
Michem® Coat 81 is best applied via off-line rod coater or in-line at the wet end of the corrugator. Dry end application is not recommended. Dilution is not recommended.
Handle in accordance with good industrial hygiene and safety practice.