Michem® Flex HS 268

Brand Family Overview

StaticBan® conductive coatings provide optimal levels of protection against damaging electrical microcurrents. These waterbased coatings form a protective shield around sensitive electronic products, and eliminate the need for separate protective coatings to prevent rub-off.

See more StaticBan products.


Used for heat sealing or dry bond lamination applications, offering low temperature seal initiation and stronger bonds to paper, metal (foil or metalized surface), various primed films such as matt, pearlized cavitated BOPP or BOPET films. It should be used with the addition of a wax emulsion to control the coefficient of friction (typically 2 to 4% by weight) e.g. Michem® Lube 160 RPH.


Water based dispersion of high molecular weight polyolefin

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Heat Seal Coatingsmetal, Substrate - film, Substrate - paper
Functional Coatingsbarrier

See more products recommended for Heat Seal Coatings.
See more products recommended for Functional Coatings.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite liquid
pH9.4 - 10.5

Site of Manufacture (and Product Code)


Application Data

Michem® Flex HS 268 can be applied via rod, gravure, and spray. The EZ cup viscosity value for a #3 cup is 33 - 35 seconds.


Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.