Michem® Flex R1924
Brand Family Overview
StaticBan® conductive coatings provide optimal levels of protection against damaging electrical microcurrents. These waterbased coatings form a protective shield around sensitive electronic products, and eliminate the need for separate protective coatings to prevent rub-off.See more StaticBan products.
Promotes print receptivity and adhesion of UV cured inks and coatings to flexible packaging substrates and labels.
Water-based print receptive primer
This product is used in many applications including the following:
|Functional Coatings||print receptivity, rub resistance, water resistance|
See more products recommended for Functional Coatings.
These physical properties are typical but should not be considered specifications.
|Appearance||Straw to pink colored translucent liquid|
|EZ Cup Viscosity (s)||25 - 27|
|pH||7.0 - 9.0|
Site of Manufacture (and Product Code)
Michem® Flex R1924 can be applied via gravure, flexo and other coating methods. A corona treatment of the surface is recommended before applying the coating. A coat weight of 0.5 gsm dry is recommended. The product needs to be dried using hot air. EZ Cup Viscosity - #2Cup, 25 - 27 seconds.
Handle in accordance with good industrial hygiene and safety practice.