Michem® Prime 5931
Brand Family Overview
StaticBan® conductive coatings provide optimal levels of protection against damaging electrical microcurrents. These waterbased coatings form a protective shield around sensitive electronic products, and eliminate the need for separate protective coatings to prevent rub-off.See more StaticBan products.
Provides improved adhesion to polyolefin substrates and also exhibits excellent adhesion to paper, metallic and polymeric substrates as well as glass and polyester scrim. It can serve as a tie coat or primer and increases printability on metallic and polymeric substrates. It can be used as a heat sealable coating on most polymeric films, paper and foil. Patents Pending.
Modified ethylene acrylic acid dispersion
This product is used in many applications including the following:
|Cable & Cordage||adhesion promotion, heat seal|
|Textiles & Leather||adhesion promotion, heat seal|
|Fiber Sizing||PE compatible|
|Inks||adhesion promotion, chemical resistance|
|Overprint Varnishes||adhesion promotion, chemical resistance|
|Nonwovens||heat seal for binders|
See more products recommended for Cable & Cordage.
See more products recommended for Textiles & Leather.
See more products recommended for Fiber Sizing.
See more products recommended for Inks.
See more products recommended for Overprint Varnishes.
See more products recommended for Nonwovens.
These physical properties are typical but should not be considered specifications.
|Appearance||White translucent liquid|
|EZ Cup Viscosity (s)||8 - 13|
|pH||8.0 - 10.0|
Site of Manufacture (and Product Code)
Michem®Prime 5931 can be applied by flexographic or rotogravure coating methods. A typical application rate of 1-2 gsm dry coating weight is recommended for most heat seal applications. As a tie coat or print primer application rates of 0.2 to 0.5gsm are usually sufficient. EZ Cup Viscosity = 8 - 13seconds, #3 Cup.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.