Michem® Tite 242AF
Brand Family Overview
StaticBan® conductive coatings provide optimal levels of protection against damaging electrical microcurrents. These waterbased coatings form a protective shield around sensitive electronic products, and eliminate the need for separate protective coatings to prevent rub-off.See more StaticBan products.
A coating designed to provide a tenacious bond between corrugated and either Surlyn or polyethylene clear skin pack films, firmly trapping the product in between. It can only be glued with hot melt adhesives, except where the coating has been flexo applied and ommitted from areas to be glued.
Skin packaging primer
This product is used in many applications including the following:
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|EZ Cup Viscosity (s)||15 - 30|
|pH||9.2 - 10.2|
Site of Manufacture (and Product Code)
MT242AF is usually applied at the dry end of the corrugator. EZ Cup Viscosity = 15 - 30seconds, #3 Cup.
Handle in accordance with good industrial hygiene and safety practice.