Brand Family Overview
StaticBan® conductive coatings provide optimal levels of protection against damaging electrical microcurrents. These waterbased coatings form a protective shield around sensitive electronic products, and eliminate the need for separate protective coatings to prevent rub-off.See more StaticBan products.
A coating which provides water and grease resistance and excellent MVTR properties on kraft liner and other substrates. When properly applied over a base coat, this repulpable coating is recommended as a replacement for some curtain coating applications, poly-laminated board and plastic bags.
MVTR, water and grease resistance coating
This product is used in many applications including the following:
|Pulp & Paper||grease & oil resistance, MVTR|
|Corrugated||MVTR, release with barrier|
See more products recommended for Pulp & Paper.
See more products recommended for Corrugated.
See more products recommended for Folding Carton.
See more products recommended for Paper Products.
These physical properties are typical but should not be considered specifications.
|EZ Cup Viscosity (s)||9 - 20|
|pH||8.2 - 9.2|
Site of Manufacture (and Product Code)
VaporCoat® 2200R is best applied by rod coater at a rate of 4-7 wet pounds per MSF and as a pre-applied coating or in-line at the wet end of the corrugator or by blade, flexo or gravure at the dry end of the corrugator. EZ Cup Viscosity = 9 - 20seconds, #3 Cup.
Handle in accordance with good industrial hygiene and safety practice. Wear personal protective equipment.