Priming Solution Indicator
Brand Family Overview
U-Nyte™ products are fiberglass mat binders formulated with phenoxy toughened epoxy resin and compounded with a curing agent. They are used in the manufacturing of nonwoven and textile rolled goods, are compatible with vinyl ester, unsaturated polyester, epoxy and urethane, and are available in powder and flake form.See more U-Nyte products.
Priming solution indicator used to prove the presence of primer solution on the sheet. Yellow to orange liquid turning blue in presence of ILP and Sapphire coated substrates.
Indicator solution for primed paper substrates.
These physical properties are typical but should not be considered specifications.
|Appearance||Yellow to orange liquid|
|Percent Non-Volatile||0.0 - 0.99|
|Brookfield Viscosity (cps, mPa·s)||<50|
Site of Manufacture (and Product Code)
1) Using a graduated eyedropper (pipette), dispense 10 drops of the indicator on the treated sheet. 2) Stream the indicator across the length and width of the sheet, including edges. Wait 30 seconds, then blot the excess with an absorbent towel. 3) Check color change to light blue, indicating the presence of the primer solution.
Ensure adequate ventilation. Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharges. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Use only in an area containing flame proof equipment.