DigiGuard® Gloss 110

Brand Family Overview

VaporCoat® recyclable water-based coatings confer high barrier to paper-based packaging and wraps. Most VaporCoat grades are designed for “low MVTR”, to retard water vapor transmission in order to keep perishables fresh, frozen goods intact, or sensitive contents in factory condition. In response to market interest for greater food safety and preservation, additional VaporCoat products can inhibit contaminants ordinarily found in recycled paper from migrating into packaged dry food.

See more VaporCoat products.

Usage

A high gloss, temperature resistant, water based overprint varnish which meets FDA food contact requirements.

Description

Overprint varnish for flexible packaging

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Overprint VarnishApplicator - flexo / gravure/ roll, food packaging, heat resistance, high gloss

See more products recommended for Overprint Varnish.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite, translucent liquid
pH8.0 - 10
Brookfield Viscosity (cps, mPa·s) <200
Spindle Number2
RPM60

Site of Manufacture (and Product Code)

CIN (DGG110)

Application Data

DigiGuard® Gloss 110 can be applied by flexo, gravure or roll coater. A drying temperature of 60C or above will ensuer optimum heat resistance of the coating is achieved.

Storage

Ensure adequate ventilation. Wear personal protective equipment.