Michem® Coat 40 Plus N

Brand Family Overview

VaporCoat® recyclable water-based coatings confer high barrier to paper-based packaging and wraps. Most VaporCoat grades are designed for “low MVTR”, to retard water vapor transmission in order to keep perishables fresh, frozen goods intact, or sensitive contents in factory condition. In response to market interest for greater food safety and preservation, additional VaporCoat products can inhibit contaminants ordinarily found in recycled paper from migrating into packaged dry food.

See more VaporCoat products.


A water based coating designed to provide good water resistance to corrugated board. It is cold set gluable with most adhesives.


Water resistant, gluable coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Perishableswater resistance

See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite, semi-viscous liquid
pH5.0 - 10.0
Brookfield Viscosity (cps, mPa·s) 200 - 800
Spindle Number3

Site of Manufacture (and Product Code)


Application Data

Michem® Coat 40 Plus N can be applied either in-line or off-line on the corrugator at the wet or dry end, via rod or blade.


Handle in accordance with good industrial hygiene and safety practice.