Michem® Coat 40W AFP
Brand Family Overview
VaporCoat® recyclable water-based coatings confer high barrier to paper-based packaging and wraps. Most VaporCoat grades are designed for “low MVTR”, to retard water vapor transmission in order to keep perishables fresh, frozen goods intact, or sensitive contents in factory condition. In response to market interest for greater food safety and preservation, additional VaporCoat products can inhibit contaminants ordinarily found in recycled paper from migrating into packaged dry food.See more VaporCoat products.
Water resistant coating with excellent cold set gluability.
Water resistant, gluable coating
This product is used in many applications including the following:
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||7.0 - 9.0|
|Brookfield Viscosity (cps, mPa·s)||450 - 950|
Site of Manufacture (and Product Code)
Michem® Coat 40W AFP can be applied at the wet or dry end of the corrugator using either a blade or rod coater. It can also be applied offline.
Handle in accordance with good industrial hygiene and safety practice.