Michem® Coat 95
Brand Family Overview
VaporCoat® recyclable water-based coatings confer high barrier to paper-based packaging and wraps. Most VaporCoat grades are designed for “low MVTR”, to retard water vapor transmission in order to keep perishables fresh, frozen goods intact, or sensitive contents in factory condition. In response to market interest for greater food safety and preservation, additional VaporCoat products can inhibit contaminants ordinarily found in recycled paper from migrating into packaged dry food.See more VaporCoat products.
A good multi-purpose coating that provides excellent water, oil and grease resistance. This product is heat sealable and cold set gluable as well.
Water and grease resistant, heat sealable coating
This product is used in many applications including the following:
|Heat Seal Coatings||Substrate - paper|
|Food Service||grease & oil resistance, water resistance|
|Perishables||grease & oil resistance, water resistance|
See more products recommended for Heat Seal Coatings.
See more products recommended for Food Service.
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||8 - 8.6|
|Brookfield Viscosity (cps, mPa·s)||250 - 650|
Site of Manufacture (and Product Code)
Michem®Coat 95 is designed to be flexo or gravure applicable. For use as a heat seal coating on paper at a dry coating weight between 4 - 6gsm is recommended. Typical sealing conditions are 140-200C, 4 bar pressure, 1 sec dwell time. EZ Cup Viscosity = 20 - 40seconds, #3 Cup.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.