Michem® Emulsion 1270
Brand Family Overview
VaporCoat® recyclable water-based coatings confer high barrier to paper-based packaging and wraps. Most VaporCoat grades are designed for “low MVTR”, to retard water vapor transmission in order to keep perishables fresh, frozen goods intact, or sensitive contents in factory condition. In response to market interest for greater food safety and preservation, additional VaporCoat products can inhibit contaminants ordinarily found in recycled paper from migrating into packaged dry food.See more VaporCoat products.
Provides slip and block resistance in a wide variety of coatings and formulas. It has very broad global food contact compliance, combined with a wide pH compatibility. It is a more cost effective solution than Michem® Emulsion 13025P.
Nonionic carnauba emulsion
This product is used in many applications including the following:
|Functional Coatings||block resistance, slip and lubricity|
See more products recommended for Functional Coatings.
These physical properties are typical but should not be considered specifications.
|Appearance||Tan, low viscosity liquid|
|pH||8.0 - 11.0|
|Brookfield Viscosity (cps, mPa·s)||40 max|
Site of Manufacture (and Product Code)
Michem® Emulsion 1270 should be added at a few percent solids (typically 2 to 4%) in your coating, with adequate mixing.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.