Michem® Lube 160RPH
Brand Family Overview
VaporCoat® recyclable water-based coatings confer high barrier to paper-based packaging and wraps. Most VaporCoat grades are designed for “low MVTR”, to retard water vapor transmission in order to keep perishables fresh, frozen goods intact, or sensitive contents in factory condition. In response to market interest for greater food safety and preservation, additional VaporCoat products can inhibit contaminants ordinarily found in recycled paper from migrating into packaged dry food.See more VaporCoat products.
APEO-free and formaldehyde-free slip additive made from renewable materials allowing to control the coefficient of friction. This additive enters the formulation of acrylics, PVdC and Michelman low temperature heat seal coatings without affecting bond strength, printability and barrier properties of the coatings. Michem® Lube 160 RPH fully complies with FDA and EU food contact regulations.
Slip and anti-block properties
This product is used in many applications including the following:
|Functional Coatings||block resistance, slip and lubricity|
See more products recommended for Functional Coatings.
These physical properties are typical but should not be considered specifications.
|Appearance||Cream colored, opaque liquid|
|pH||4.0 - 7.5|
|Brookfield Viscosity (cps, mPa·s)||<15|
Site of Manufacture (and Product Code)
To be used as additive.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.