Michem® Tite 335AF
Brand Family Overview
VaporCoat® recyclable water-based coatings confer high barrier to paper-based packaging and wraps. Most VaporCoat grades are designed for “low MVTR”, to retard water vapor transmission in order to keep perishables fresh, frozen goods intact, or sensitive contents in factory condition. In response to market interest for greater food safety and preservation, additional VaporCoat products can inhibit contaminants ordinarily found in recycled paper from migrating into packaged dry food.See more VaporCoat products.
A coating which bonds corrugated to Surlyn or polyethylene skin pack films, firmly trapping the product in between. Provides excellent adhesion to most wax free, water based or litho inks. This product is hot melt gluable.
Skin packing / heat seal coating
This product is used in many applications including the following:
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||7.8 - 8.8|
|Brookfield Viscosity (cps, mPa·s)||150 - 850|
Site of Manufacture (and Product Code)
Michem® Tite 335AF can be applied to sheeted corrugated using a roll coater. EZ Cup Viscosity = 15 - 35 seconds, #3 Cup. It can also be applied at the dry end of the corrugator.
Handle in accordance with good industrial hygiene and safety practice.