Michem® Wood Release 7010
Brand Family Overview
VaporCoat® recyclable water-based coatings confer high barrier to paper-based packaging and wraps. Most VaporCoat grades are designed for “low MVTR”, to retard water vapor transmission in order to keep perishables fresh, frozen goods intact, or sensitive contents in factory condition. In response to market interest for greater food safety and preservation, additional VaporCoat products can inhibit contaminants ordinarily found in recycled paper from migrating into packaged dry food.See more VaporCoat products.
For use with formaldehyde-based resins, this product increases process efficiency by improving mat integrity and limiting carbon buildup on the platen and belt surfaces.
Release spray solution
This product is used in many applications including the following:
|Conventional Resin Based Board||release|
|Medium Density Fiberboard||release|
See more products recommended for Conventional Resin Based Board.
See more products recommended for Medium Density Fiberboard.
See more products recommended for Particle Board.
These physical properties are typical but should not be considered specifications.
|pH||6.0 - 9.0|
Site of Manufacture (and Product Code)
Michem® Wood Release 7010 is easily dilutable with water and is applied by spraying over the fiber mat or on the continuous press belt. Soft or deionized water is recommended for dilution.
Avoid contact with eyes, skin and clothing. Handle in accordance with good industrial hygiene and safety practice. Product containers should be kept closed prior to use and when not in use.. Use personal protective equipment as required.