Release Coat® P1
Brand Family Overview
VaporCoat® recyclable water-based coatings confer high barrier to paper-based packaging and wraps. Most VaporCoat grades are designed for “low MVTR”, to retard water vapor transmission in order to keep perishables fresh, frozen goods intact, or sensitive contents in factory condition. In response to market interest for greater food safety and preservation, additional VaporCoat products can inhibit contaminants ordinarily found in recycled paper from migrating into packaged dry food.See more VaporCoat products.
This product is one part of a two part silicone release coating. A catalyzed release coat system offers superior release and in most cases FDA compliance. This system is not gluable.
Uncatalyzed portion of a two-part silicone release coating
This product is used in many applications including the following:
See more products recommended for Industrial.
These physical properties are typical but should not be considered specifications.
|Appearance||White, semi-viscous liquid|
|pH||3.0 - 6.0|
|Brookfield Viscosity (cps, mPa·s)||300 - 800|
Site of Manufacture (and Product Code)
Release Coat® P1 must be combined with Catalyst P1 before applying to a substrate. This product may be applied by rod or blade coater.
Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.