Michem® Flex P2312
Brand Family Overview
ACqua™ aqueous dispersions based on ionomers of ethylene copolymers offer environmentally-friendly metal protection resisting acids, solvents and corrosion.See more ACqua products.
A primer for film, metalized film, printed film, and paper substrates to promote excellent adhesion to extrusion coated resins resulting in high bond strength for dry and low moisture package contents. It creates very strong adhesion between treated film and PE extrudate. It may also be used on film substrates to promote adhesion to liquid top coats such as Michelman heat seal coatings and acrylic coatings.
Water-based primer for extrusion coatings and water based coatings.
This product is used in many applications including the following:
|Extrusion Coating Primers||adhesion for film, adhesion for metal and paper|
See more products recommended for Extrusion Coating Primers.
These physical properties are typical but should not be considered specifications.
|EZ Cup Viscosity (s)||23 - 25|
|pH||10.0 - 12.0|
|Shelf Life (mo)||12|
|Freeze/Thaw Stability||Stable after 5 Cycles|
|Percent Non-Volatile||11.0 - 12.0|
|Specific Gravity||1.00 - 1.02|
|Brookfield Viscosity (cps, mPa·s)||20 - 50|
Site of Manufacture (and Product Code)
Michem® Flex P2312 is designed specifically for use as an extrusion primer. EZ Cup viscosity #2 Cup, 23 25 sec. Recommended application weight for film substrates is 0.025 - 0.075 dry g/m2 (0.5-1.5 wet g/m2).
Avoid contact with eyes, skin and clothing. Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.